Wiring Electrical Connectors — 1995 Buell 1995 THUNDERBOLT S2 (S2)

CABLE STRAP

CONDUIT, 1/2 I.D. x 10 ft. lg. (black vinyl)

CONDUIT, 1/4 I.D. x 10 ft. lg. (black vinyl)

CONDUIT, 1/4 I.D. x 10 ft. lg. (black vinyl)

CONDUIT, 1/8 I.D. x 10 ft. lg. (black vinyl)

CONDUIT, 1/8 ID x 10 ft. (black vinyl) (high temp)

CONDUIT, 3/8 I.D. x 10 ft. lg. (black vinyl)

CONDUIT, 5/16 I.D. x 10 ft. lg. (black vinyl)

CONDUIT, 7/16 I.D. x 10 ft. lg. (black vinyl)

CONNECTOR

CONNECTOR TAB, three terminal

CONNECTOR TAB, two terminal

CONNECTOR, butt splice, 10-12 gauge

CONNECTOR, butt splice, 14-16 gauge

CONNECTOR, butt splice, 18-22 gauge

CONNECTOR, female bullet

CONNECTOR, single pin

CONNECTOR, single socket

CONNECTOR, six pin

CONNECTOR, six socket

CONNECTOR, ten socket

HOUSING SOCKET, relay

HOUSING, 12 pin terminal

HOUSING, 12 socket terminal

INSULATING SLEEVE, male bullet connector

INSULATOR, receptacle housing (lgn. module connector)

MAIN WIRING HARNESS (not illustrated)

MAIN WIRING HARNESS (not illustrated) (also used on 1995 Cal. S2 models)

PIN, single socket

SOCKET, single pin

TERMINAL

TERMINAL, cap type, 1/4 inch diameter

TERMINAL, flag, black, amp

WIRE CONNECTOR

WIRE HARNESS, front turn signal ground (not illustrated)

WIRE TERMINAL, female spade type, 1/4 slot

WIRE TERMINAL, female spade type, 5/16 slot

WIRE TERMINAL, ring type, 1/4 diameter hole (18 gauge)

WIRE TERMINAL, ring type, 3/16 diameter hole (14-16 gauge)

WIRE TERMINAL, ring type, No. 10 hole

WIRE TERMINAL, ring type, No. 10 hole

WIRE, battery positive to circuit breaker